If you have trouble when you are using mods.dk, then look at the support pages. Principle of the Interface PCB 1258M which has to be installed in the socket for the red straps (Control- RRC only). A script, written in Python, allows to give commands to an Icom IC-7100.Python is a scripting language available for all popular Operating Systems.It was tested Search help: Support (FAQ). If you do not have the Adapter board and have a modified IC-7100 it will show up in the way that you can switch on the radio, The information on the display looks normal but you get no speaker audio and the VFO and buttons do not work. The ICOM modification was done from serial numbers US>02003001 and in EU>03003601. The Adapter 1258M can be used both for early IC-7100 and modified IC-7100 This board is quite simple and can be built by your self also. The Adapter is available in our webshop or from the distributors. To handle this modification in the Remoterig a adapter PCB called 1258M has to be installed in the (red)strap socket of the Control-RRC. They have solved it by reducing the amplitude of the data sent from control to main unit. Simple remove the diodes, mods for various Icom Transceivers especially IC 7100, to operate 630 meters. The reason of the modification was to avoid that data communication will be heard in FM mode at low modulation levels. Mod for some rigs to get on 630 meter band. ICOM have made a hardware modification lately (March 2014) which makes later produced rigs incompatible with the original Remoterig boxes (New IC-7100 control panels are also incompatible with old IC-7100 main units).
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |